From Old Barn Boards to Wall Cladding With Real Character

Wood that has weathered for decades develops a surface that new timber cannot imitate. Designers and builders now use that quality on interior walls and building façades alike. Knowing where the material comes from and how it behaves helps you judge whether it suits your project.

Why weathered timber looks the way it does

Years of sun, rain and frost change the surface of wood. UV light turns the outer fibres silver grey, while repeated wetting and drying opens fine cracks and sharpens the grain. Old nail holes, saw marks and colour shifts add to the effect. Because the timber has already shrunk and settled, it is often more dimensionally stable than freshly cut boards.

Most of this material comes from barns, sheds, bridges and industrial buildings. Oak, pine and larch are common species. Old trees grew slowly, which gives dense, tightly ringed wood that modern plantation timber rarely matches.

Using reclaimed boards on walls and façades

Reclaimed wood cladding works indoors and outdoors, but the preparation differs. Interior boards are usually cleaned, denailed and sometimes heat treated to remove insects. Exterior boards need a closer look at species, thickness and condition, because rot or deep splits shorten their lifespan.

Sourcing matters as much as the wood itself. Suppliers such as Historisch Hout sort boards by origin, species and degree of weathering, which removes much of the guesswork when you need a consistent look across a large surface.

Before ordering, it helps to check a few points:

  • The species and original use of the timber
  • The moisture content, ideally matched to the room or climate
  • Whether the boards were treated against insects
  • The variation in width and thickness within one batch
  • The fixing method and the ventilation space behind the cladding

 

Installation and care in practice

Let the boards acclimatise in the room where they will be fitted for about a week. This reduces movement after installation. Use stainless steel or coated screws, since ordinary steel reacts with the tannins in oak and leaves black stains around the fixings.

Outdoors, leave a ventilated cavity of at least 20 millimetres behind the boards so moisture can escape. Without that gap, water gets trapped and even durable species deteriorate faster. Vertical boards shed rain more efficiently than horizontal ones, though both work when detailed correctly.

Maintenance stays modest. Indoors, dusting and an occasional coat of matt oil are enough. Outside, you can let the wood silver naturally or apply a pigmented oil to hold the colour for longer.

Reusing old timber also keeps usable material out of landfill and reduces the demand for newly felled trees. With the right species, careful preparation and proper detailing, reclaimed boards can last for decades more.

Scroll to Top